619REQ009DBMA
619 = FAN COIL UNIT
R = MODEL
E = 208/230-1-60 VOLTAGE
Q = HEAT PUMP SYSTEM TYPE
009 = .75 TON NOMINAL CAPACITY
D = DUCTED INDOOR FAN COIL TYPE
B = 1:1 MAXIMUM NUMBER OF FAN COIL UNITS THAT CAN BE CONNECTED TO THE OUTDOOR UNIT
MA = ALL MODELS

Features:

• Modes: Cool, Heat, Dry, Fan, Auto
• Timer
• Sleep mode
• Rear or Bottom Return
• Outside Air Intake
• Built-in condensate Lift pump
• Follow Me (Sense Temperature at handheld remote)
• Heating Setback (46° F Heating Mode)
• Quiet operation, as low as 30 dB(A)

The 38MA*R series ductless split systems are a matched combination of an outdoor condensing unit and an indoor fan coil unit connected only by refrigerant tubing and wires.The ductless system permits creative solutions to design problems such as:

• Add-ons to current space (an office or family room addition)
• Special space requirements
• When changes in the load cannot be handled by the existing system
• When adding air conditioning to spaces that are heated by hydronic or electric heat and have no ductwork

Historical renovations or any application where preserving the look of the original structure is essential.The ideal compliment to your ducted system when it is impractical or prohibitively expensive to use ductwork. The compact indoor fan coil units take up very little space in the room and do not obstruct windows. The fan coils are attractively styled to blend with most room decors. Advanced system components incorporate innovative technology to provide reliable cooling performance at low sound levels.

LOW SOUND LEVELS
When noise is a concern, the ductless split systems are the answer.The indoor units are whisper quiet. There are no compressors indoors, either in the conditioned space or directly over it, and there is none of the noise usually generated by air being forced through ductwork.
When sound ordinances and proximity to neighbors demand quiet operation, the 38MA*R unit is the right choice. The advanced, horizontal airflow design distributes air more evenly over the coil.
SECURE OPERATION
If security is an issue, outdoor and indoor units are connected only by refrigerant piping and wiring to prevent intruders from crawling through ductwork. In addition, since 38MA*R units can be installed close to an outside wall, coils are protected from vandals and severe weather.
FAST INSTALLATION
This compact ductless split system is simple to install. A mounting bracket is standard with the indoor units and only wire and piping need to be run between the indoor and outdoor units (High Walls).These units are fast and easy to install ensuring minimal disruption to customers in the home or workplace. This makes the 38MA*R ductless split systems the equipment of choice, especially in retrofit situations.
SIMPLE SERVICING AND MAINTENANCE
Removing the top panel on outdoor units provides immediate access to the control compartment, providing a service technician access to check unit operation. In addition, the draw-thru design of the outdoor section means that dirt accumulates on the outside surface of the coil. Coils can be cleaned quickly from the inside using a pressure hose and detergent.
On all indoor units, service and maintenance expense is reduced due to easy-to-use cleanable filters. In addition, these systems have extensive self-diagnostics to assist in troubleshooting.
BUILT-IN RELIABILITY
Ductless split system indoor and outdoor units are designed to provide years of trouble-free operation.
The indoor units include protection against freeze-up and high evaporator temperatures on heat pumps.
The condensing units on heat pumps are protected by a three minute time delay before the compressor starts the over-currentprotection and the high temperature protection.
INDIVIDUAL ROOM COMFORT
Maximum comfort is provided because each space can be controlled individually based on usage pattern. The air sweep (in some indoor models) feature provided permits optimal room air mixing to eliminate hot and cold spots for occupant comfort. In addition, year-round comfort can be provided with heat pumps.
ECONOMICAL OPERATION
The ductless split system design allows individual room heating or cooling when required. There is no need to run large supply-airfans or chilled water pumps to handle a few spaces with unique load patterns. In addition, because air is moved only in the space required, no energy is wasted while air moves through the ducts.
EASY-TO-USE CONTROLS
The indoor units have microprocessor-based controls to provide the ultimate in comfort and efficiency. The user friendly wireless remote control provides the interface between the user and the unit.
ACCESSORIES
Customizing these ductless split systems to your application is easily accomplished. Adding a condensate pump accessory to the indoor fan coil provides installation flexibility.
OPTIONAL WIRED CONTROLLER
AGENCY LISTINGS
All systems are listed with AHRI (Air Conditioning, Heating & Refrigeration Institute), and ETL.

Côr has engineered a smart thermostat that truly lives up to the name. Offering convenience, efficiency, peace of mind and powerful control, the Côr™ thermostat gives you access to your comfort from anywhere. From our approachable and attractive wall-mounted interface, to wireless home networks, to anywhere in the world from an Internet-connected device, you can take complete command of most aspects of your system. Programming temperature and humidity, changing settings, even monitoring and tracking energy use, this deluxe thermostat does it all with style.

STANDARD FEATURES

• Full-color touch screen
• Intuitive, on-screen prompts
• Local weather 4-day forecast
• Remote access via Internet and Apple® and Android(TM) apps for smartphone or tablet devices
• Detailed energy reports and customized energy saving tips
• Smart setback intelligently adapts beyond manual programming for greater efficiency, while still meeting your ideal comfort levels
• One-button Touch-N-Go quick-settings-change feature
• Ideal Humidity System® management capable for exacting comfort
• Hybrid Heat® system management capable
• Intelligent, heating- and cooling-comfort staging capable
• Auto changeover between heating and cooling
• On or Auto fan speed options
• Day-at-a-glance 7-day (wake, away, home, sleep) guided programming
• Vacation hold programming
• Choice of fixed-schedule or runtime based filter, UV lamp, or humidifier pad replacement reminders
• High/low temperature, high/low humidity, and system maintenance reminders
• 5-year parts limited warranty

KSAIC0101230 - 24V Ductless Interface Control Kit 208 - 230V

Use the 24V Interface Kit to connect a single zone ductless system to a third party, single stage conventional thermostat. Kit includes:

• Control box
• Installation manual
• 3 screws
• 3 wall anchors
• Return air thermistor assembly
• Return air thermistor assembly extension wires - 16.4'

Features:

• Rated for indoor and outdoor mounting
• LED display on control board