Your browser is not supported. For the best experience, you should upgrade to a modern browser with improved speed and security.

LAARS - LS-SW-2-40R-L Laars-Stor Indirect Water Heater 40 gal.

Item: LS-SW240RL
MFR: LS-SW-2-40R-L


Sign in to see real-time inventory at the stores closest to you.
What’s the price?
Sign in for pricing.

Frequently Bought Together

Best Sellers

About This Product

Product Info


LAARS - Laars-Stor Single Wall - Indirect (tank-type)
The ingenious Laars-Stor single wall was engineered to provide the lowest pressure drop, the highest hot water output and the highest amount of effective actual heat transfer area of any indirect fired water heater in the industry.

The LAARS-STORTM Single-Wall Models feature:
■ Heat Exchanger—Single-Wall 11⁄2" O.D. glass coated (Vitraglas®) carbon steel coil. The coil has a heat transfer area of 14.2 sq. ft. and a stored water volume of 2.7 Gal. Maximum supply temperature from the boiler must not
exceed 250° F.
■ Factory Installed Sediment Reducing Inlet Tube—Cold water inlet sediment reducing device helps prevent sediment build up in tank. Increases first hour delivery of hot water while minimizing temperature build up in tank.
■ Glass-lined Steel Tank—LAARS water heater tanks are protected from the corrosive effects of hot water by an
exclusive ceramic porcelain-like coating. The high silica lining provides a tough interior surface for our hot water tanks.
■ Immersed Adjustable Honeywell Aquastat—Fast acting immersion aquastat for automatic temperature control (adjustable from 80°F to 160°F).
■ Supply and Return Connections—1" NPT female connections are located
on the front for both the boiler collector supply and return.
■ 2" Non-CFC Foam Insulation—Covers the side and top of tank, reducing the amount of heat loss. This results in less energy consumption, improved operation efficiencies and jacket rigidity.
■ Potable Water Connections—3⁄4" NPT factory installed true dielectric fittings extend water heater life and eases installation.
■ Three Protective Aluminum Anode Rods—Provide added protection against corrosion for long trouble-free service.
■ Steel Tank—Heavy gauge steel automatically formed, rolled and welded to assure a continuous seam for glass
■ T&P Relief Valve—Included.
■ Brass Drain Valve.
■ I=B=R Certified—These water heaters are rated by the Institute of Boiler and Radiation Manufacturers (I=B=R) to provide accurate performance data within the standards of the certification. The I=B=R rating is issued by the Hydronics Institute Division of GAMA and provide a recognized standard for proper comparison of hydronic appliances.
Warning: this product contains a chemical known to the State of California to cause cancer.


Weight172 Pounds (lbs)
Length23 Inches (In)
Width23 Inches (In)
Height42 Inches (In)
Country of OriginUSA
BTU Input220000
Connection Size3/4" NPT
Connection TypeNPT
CUL ListedYes
Energy Star RatedNo
FinishPowder Coated
Inlet Connection Size1"
Maximum Pressure (PSI)150
Maximum Temperature160°F (71.1°C)
Mounting TypeFloor
Prop 65Yes
Temperature Range80°F to 160°F (26.6°C to 71.1°C)
TypeIndirect Water Heater
UL ListedNo
UL RecognizedNo
Warranty OfferedYes

Equipment Part List

Motor Season