Your browser is not supported. For the best experience, you should upgrade to a modern browser with improved speed and security.
Click here for information on new branch procedures as a result of COVID-19

Payne® - 95% AFUE 80000 Btuh ECM Condensing Gas Furnace

Item: PG95ESAA60080C
MFR: PG95ESAA60080C

Availability

Sign in to see real-time inventory at the stores closest to you.
What’s the price?
Sign in for pricing.

Frequently Bought Together

Venting

Other

About This Product

Product Info

Description

Payne® - 95% AFUE 80000 Btuh ECM Condensing Gas Furnace

The PG95ESAA Multipoise Condensing Gas Furnace features a single-stage gas valve and a fixed-speeds, constant torque (FCT) ECM blower motor. With an Annual Fuel Utilization Efficiency (AFUE) of up to 96.0% this furnace provides added savings over standard gas furnaces. It features 4-way multipoise installation flexibility, and is available in ten model sizes. All sizes except the 26,000 BTUH model can be vented for direct vent/two-pipe, ventilated combustion air, or single-pipe applications. The 26,000 BTUH model can use the same 2-pipe venting system using outside air for combustion, but is not considered direct-vent. All sizes are design certified in Canada, and select sizes are certified for mobile/manufactured home use with conversion kit accessory.

PERFORMANCE
  • Fixed-speeds, constant torque (FCT) ECM blower motor for electrically efficient operation all year long in heating, cooling and continuous fan operation.
  • Single-speed inducer motor, and single-stage gas valve
  • Silicon Nitride Hot Surface Igniter.
  • Adjustable blower speed for heating and cooling.
  • Aluminized-steel primary heat exchanger.
  • Stainless-steel condensing secondary heat exchanger.
INSTALLATION FLEXIBILITY
  • 4-way multipoise design for upflow, downflow or horizontal installation, with unique vent elbow and optional through-the-cabinet downflow venting capability.
  • Factory-configured ready for upflow applications.
  • Ideal height 35" (889 mm) cabinet: short enough for taller coils, but still allows enough room for service.
  • Two-pipe venting, single-pipe venting or ventilated combustion air.
APPLICATIONS
  • Approved for Twinning applications with accessory kit (42060B through 60100C models, only).
  • Approved for Manufactured Housing/Mobile Home applications with MH accessory kit. (30040A through 66120D models, only).
  • Propane convertible with gas conversion accessory kit.
CERTIFICATIONS
  • All sizes meet ENERGY STAR® Version 4.1 criteria for gas furnaces: 95%+ AFUE.
  • Cabinet air leakage less than 2.0% at 1.0 in. W.C. and cabinet air leakage less than 1.4% at 0.5 in. W.C. when tested in accordance with ASHRAE standard 193.
  • All sizes meet 40 ng/J NOx emissions. Can be installed in air quality management districts with a 40 ng/J NOx emissions requirement
Warning: this product contains a chemical known to the State of California to cause cancer. P65Warnings.ca.gov

Specifications

Weight180.9 Pounds (lbs)
Length29.5 Inches (In)
Width21 Inches (In)
Height35 Inches (In)
Country of OriginUSA
AFUE95%
Air FlowMulti-Position
Blower Motor HP1 HP
Blower Motor RPM400-1200
Blower Motor Speeds5 (Five)
Blower Motor TypeECM (Electronically Commutated Motor)
Blower Wheel11" x 10"
BrandPayne
BTU Input80000
BTU Output78000
CFM1330
Circuit Breaker - Max Amps20
ColorGray
Cycle/Hertz60 Hz
Energy Star RatedYes
ETL ListedNo
FER CompliantYes
Fuel TypeNatural Gas or LP
Full Load Amps11.5
Gas Connection1/2" [12.7 mm] N.P.T.
Ignition TypeHot Surface (HSI)
Includes Filter RackNo
PhaseSingle
Product FamilyPG95ESA
Prop 65Yes
StageSingle
UL ListedNo
Voltage115 VAC
Warranty OfferedNo

Documents

Equipment Part List

Loading...
Motor Season